/**
* @file ADS1112_ATY.h
*
* @param Project DEVICE_GENERAL_ATY_LIB
*
* @author ATY
*
* @copyright
*       - Copyright 2017 - 2023 MZ-ATY
*       - This code follows:
*           - MZ-ATY Various Contents Joint Statement -
*               <a href="https://mengze.top/MZ-ATY_VCJS">
*                        https://mengze.top/MZ-ATY_VCJS</a>
*           - CC 4.0 BY-NC-SA -
*               <a href="https://creativecommons.org/licenses/by-nc-sa/4.0/">
*                        https://creativecommons.org/licenses/by-nc-sa/4.0/</a>
*       - Your use will be deemed to have accepted the terms of this statement.
*
* @brief Familiar functions of DS18B20 for all embedded device
*
* @version
*       - 1_01_230828 > ATY
*           -# Preliminary version, first Release
********************************************************************************
*/

#ifndef __ADS1112_ATY_H
#define __ADS1112_ATY_H

#include "INCLUDE_ATY.h"
#include "HW_I2C_ATY.h"

/******************************* For user *************************************/
// Set AD0/AD1 voltage level for device address, 0 for low, 1 for high, 2 for float
#define ADS1112_AD0 0
#define ADS1112_AD1 0
#define VREF_COM    1.24f
// #define __DEBUG_ADS1112_ATY

/******************************************************************************/

#if ((ADS1112_AD0 == 0) && (ADS1112_AD1 == 0))
#define ADS1112_ADDRESS  (0x48)
#elif ((ADS1112_AD0 == 0) && (ADS1112_AD1 == 2))
#define ADS1112_ADDRESS  (0x49)
#elif ((ADS1112_AD0 == 0) && (ADS1112_AD1 == 1))
#define ADS1112_ADDRESS  (0x4A)
#elif ((ADS1112_AD0 == 2) && (ADS1112_AD1 == 0))
#define ADS1112_ADDRESS  (0x4B)
#elif ((ADS1112_AD0 == 1) && (ADS1112_AD1 == 0))
#define ADS1112_ADDRESS  (0x4C)
#elif ((ADS1112_AD0 == 1) && (ADS1112_AD1 == 2))
#define ADS1112_ADDRESS  (0x4D)
#elif ((ADS1112_AD0 == 1) && (ADS1112_AD1 == 1))
#define ADS1112_ADDRESS  (0x4E)
#elif ((ADS1112_AD0 == 2) && (ADS1112_AD1 == 1))
#define ADS1112_ADDRESS  (0x4F)
#endif

#define CHANNEL_0_1 0
#define CHANNEL_2_3 1
#define CHANNEL_0_3 2
#define CHANNEL_1_3 3
#define CONVERSION_CONTINUOUS 0
#define CONVERSION_ONCE 1
#define RESOLUTION_12BIT 0
#define RESOLUTION_14BIT 1
#define RESOLUTION_15BIT 2
#define RESOLUTION_16BIT 3
#define GAIN_1 0
#define GAIN_2 1
#define GAIN_4 2
#define GAIN_8 3

uint8_t ADS1112_Setting(uint8_t channel, uint8_t conversion, uint8_t resolution, uint8_t gain);
uint16_t ADS1112_Read(uint8_t chipAddr);
float ADS1112_Voltage(uint16_t u16Data);

#endif /* __ADS1112_ATY_H */

/******************************** End Of File *********************************/