/**
* @file MAX31865_ATY.h
*
* @param Project DEVICE_GENERAL_ATY_LIB
*
* @author ATY
*
* @copyright
*       - Copyright 2017 - 2026 MZ-ATY
*       - This code follows:
*           - MZ-ATY Various Contents Joint Statement -
*               <a href="https://mengze.top/MZ-ATY_VCJS">
*                        https://mengze.top/MZ-ATY_VCJS</a>
*           - CC 4.0 BY-NC-SA -
*               <a href="https://creativecommons.org/licenses/by-nc-sa/4.0/">
*                        https://creativecommons.org/licenses/by-nc-sa/4.0/</a>
*       - Your use will be deemed to have accepted the terms of this statement.
*
* @brief functions of MAX31865 platinum resistance temperature detector for C platform
*
* @version
*       - 1_01_251216 > ATY
*           -# Preliminary version, first Release
********************************************************************************
*/

#ifndef __MAX31865_ATY_H
#define __MAX31865_ATY_H

#include "INCLUDE_ATY.h"

/******************************* For user *************************************/

/******************************************************************************/

// MAX31865 Register Addresses
#define MAX31865_REG_CONFIG         0x00
#define MAX31865_REG_RTD_MSB        0x01
#define MAX31865_REG_RTD_LSB        0x02
#define MAX31865_REG_HFAULT_MSB     0x03
#define MAX31865_REG_HFAULT_LSB     0x04
#define MAX31865_REG_LFAULT_MSB     0x05
#define MAX31865_REG_LFAULT_LSB     0x06
#define MAX31865_REG_FAULT_STATUS   0x07

// Configuration Register Bit Definitions
#define MAX31865_CONFIG_BIAS        0x80
#define MAX31865_CONFIG_MODEAUTO    0x40
#define MAX31865_CONFIG_1SHOT       0x20
#define MAX31865_CONFIG_3WIRE       0x10
#define MAX31865_CONFIG_FAULTCTR    0x04
#define MAX31865_CONFIG_FAULTSTAT   0x02
#define MAX31865_CONFIG_FILT50HZ    0x01

// Fault Status Register Bit Definitions
#define MAX31865_FAULT_HIGH_THRESH  0x80
#define MAX31865_FAULT_LOW_THRESH   0x40
#define MAX31865_FAULT_REFIN_HIGH   0x20
#define MAX31865_FAULT_REFIN_LOW    0x10
#define MAX31865_FAULT_RTDIN_LOW    0x08
#define MAX31865_FAULT_OVUV         0x04

struct MAX31865_ATY_Dev{
    void (*nssSet)(uint8_t level);
    uint8_t (*spiProcess)(uint8_t* data_t, uint16_t len, uint8_t rw);

    uint8_t rtdWires;               // RTD wire count (2, 3, 4)
    uint8_t filter50Hz;             // Filter 50Hz (1) or 60Hz (0)
    uint8_t bias;                   // Bias on (1) or off (0)
    uint8_t autoConvert;            // Auto conversion enabled (1) or disabled (0)
    uint8_t faultControl;

    float rtdNominal;               // RTD nominal resistance (typically 100.0 ohm for PT100)
    float refResistor;              // Reference resistor value (typically 430.0 ohm for PT100)

    uint8_t initFlag;
    uint16_t rtdValue;
    uint8_t faultStatus;

    uint8_t lock;
};

uint8_t MAX31865_Init(struct MAX31865_ATY_Dev* dev);
uint8_t MAX31865_ReadConfig(struct MAX31865_ATY_Dev* dev);
uint8_t MAX31865_ReadRTD(struct MAX31865_ATY_Dev* dev);
uint8_t MAX31865_ReadFault(struct MAX31865_ATY_Dev* dev);
uint8_t MAX31865_ClearFaults(struct MAX31865_ATY_Dev* dev);
uint8_t MAX31865_OneShot(struct MAX31865_ATY_Dev* dev);

float MAX31865_CalculateResistance(struct MAX31865_ATY_Dev* dev, uint16_t rtd);
float MAX31865_CalculateTemperature(struct MAX31865_ATY_Dev* dev, uint16_t rtd);

#endif /* __MAX31865_ATY_H */

/******************************** End Of File *********************************/