main.c File Reference

#include "fw_hal.h"
#include "ci24r1.h"

Go to the source code of this file.

Macros
#define	CI24R1_MODE   1

Functions
void	GPIO_Init (void)
int	main (void)

Variables
__CODE uint8_t	TX_ADDRESS [5] ={0x34,0x43,0x10,0x10,0x01}
__CODE uint8_t	RX_ADDRESS [5] ={0x01,0x43,0x10,0x10,0x34}
uint8_t *	xbuf_data

Macro Definition Documentation

CI24R1_MODE

#define CI24R1_MODE   1

Definition at line 33 of file main.c.

Function Documentation

GPIO_Init()

void GPIO_Init

(

void

)

Definition at line 39 of file main.c.

{
    // SCLK(P32) CSN(P35)
    GPIO_P3_SetMode(GPIO_Pin_2|GPIO_Pin_5, GPIO_Mode_Output_PP);
}

main()

int main

(

void

)

Definition at line 45 of file main.c.

{
    __CODE uint8_t tmp[] = {
        0x1F, 0x80, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18,
        0x21, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x28,
        0x31, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x38,
        0x41, 0x12, 0x13, 0x14, 0x15, 0x16, 0x37, 0x48};
    uint8_t i, j, status;
 
    SYS_SetClock();
    GPIO_Init();
 
    // UART1, baud 115200, baud source Timer1, 1T mode, no interrupt
    UART1_Config8bitUart(UART1_BaudSource_Timer1, HAL_State_ON, 115200);
    UART1_TxString("UART Initialized\r\n");
 
    while (CI24R1_SPI_Test() == HAL_ERROR)
    {
        UART1_TxString(" - check failed\r\n");
        SYS_Delay(1000);
    }
    UART1_TxString(" - check passed\r\n");
 
    CI24R1_Init();
 
    if (CI24R1_MODE == 0)
    {
        // TX
        CI24R1_SetChannel(60);
        CI24R1_SetTxMode();
        CI24R1_SetTxAddress(TX_ADDRESS);
        CI24R1_SetRxAddress(RX_ADDRESS);
        UART1_TxString("CI24R1 TX Initialized\r\n");
 
        while(1)
        {
            CI24R1_PrintStatus();
            CI24R1_Tx(tmp, CI24R1_PLOAD_WIDTH);
            SYS_Delay(500);
        }
    }
    else
    {
        // RX
        CI24R1_SetChannel(60);
        CI24R1_SetRxMode();
        CI24R1_SetTxAddress(RX_ADDRESS);
        CI24R1_SetRxAddress(TX_ADDRESS);
        UART1_TxString("CI24R1 RX Initialized\r\n");
 
        while(1)
        {
            CI24R1_PrintStatus();
            CI24R1_Rx();
            UART1_TxString("\r\n");
            SYS_Delay(10);
        }
    }
}

Variable Documentation

RX_ADDRESS

__CODE uint8_t RX_ADDRESS[5] ={0x01,0x43,0x10,0x10,0x34}

Definition at line 36 of file main.c.

TX_ADDRESS

__CODE uint8_t TX_ADDRESS[5] ={0x34,0x43,0x10,0x10,0x01}

Definition at line 35 of file main.c.

xbuf_data

uint8_t* xbuf_data

extern

Definition at line 18 of file ci24r1.c.